Toner mainly refers to the substances in toner cartridges used for printing and imaging.

Although the main component is carbon, the copier toner in the toner cartridge has finer particles and higher chemical stability than some toners in our daily lives, resulting in extremely high image quality.

Many toner cartridges of copier toner manufacturers can be used again after the original toner is used up, so there are also toners sold separately on the market.

By adding toner yourself, the cost of using consumables will be greatly reduced.

The main component of copier toner is not carbon, but mainly composed of resin and binder.

The toner melts into paper fibers at high temperatures, and the resin is oxidized into a pungent-smelling gas known as “ozone”.

The whole process of copier work can be said to be a cycle, including seven steps of charging, exposure, development, image transfer, fixing, cleaning and image removal.

Copiers are common devices in our lives.

It can convert electronic documents into paper documents that are easy to carry.

Copier toner manufacturers are one of the raw materials of copiers.

Without toner, it is impossible to print text as paper text. exhibit.

Check that the copier toner cartridge is suitable for refilling.

Turn a wheel on the side of the toner cartridge to see if the powder on the magnetic rod is even and there are no scratches.

Do not add powder if the powder on the magnet bar is uneven or scratched.